Colour Room/All finishes/DFL-200
Dry Film Lubricant · DFL-200
DRY FILM LUBRICANT (Oven Cure)
Dry film lubricant coating. Published sheen: Matte (about 7 GU at 60°).
| Pencil hardness | 9H gouge / 6H scratch |
|---|---|
| Coating heat resistance | 760°C |
| Colour stable to | 204°C (400°F) |
| Recommended thickness | 6.35–19.05 µm (.25–.75 mil) |
| Cure | 15 minute ambient flash, then oven cure at 250°F |
| UV stability | Good |
Properties are the manufacturer's published figures for the Dry Film Lubricant range (technical data sheet). The image is a digital visualisation from our Colour Room, not a photograph: colours and sheen differ in person and with the part underneath. We confirm the finish on your part before coating.
